Product Description

Performance

In a single pass through the purifier at a full flow rate:

Water Removal: From 50 ppm down to less than 5 ppm in a single pass & down to 3 ppm after two passes. (According to the PPM Tester)

Gas Removal: From fully saturated with air (10% to 12% by volume) down to less than 0.1% by volume.

Particulate Matter Removal: 98% of particles over 0.5mm or over 1 mm or over 5mm at customers preference.

Dielectric Strength: Improve dielectric strength up to 75-80KV for New oil.
Acid Removal: after treatment, the acid value will down to less than 0.1mgKOH/g

Free Carbon Removal: there is no free carbon’s residue

 

Oil Regeneration Machine's Technical Parameters

Parameters	Unit	ZYD-I-30	ZYD-I-50	ZYD-I-100	ZYD-I-150	ZYD-I-200		ZYD-I-250		ZYD-I-300
Flow	L/min	30	50	100	150	200		250		300
Working vacuum	MPa	0.08 ～ 0.099
Working Pressure	MPa	≤0.4
Temperature Range	℃	20 ～ 80
Power		Three Phase 50HZ380V(as per the customer’s requirements)
Working Noise	dB（A）	75	75	75	80	80		80		80
Heating Power	kW	30	40	60	90	120		150		180
Total Power	kW	35.5	41.5	62.5	95.5	128.5		159.5		192
Inlet/Outlet	mm	φ25	φ32	φ42	φ50	φ50		φ60		φ60
Weight	kg	400	550	800	950	1100		1300		1600
Overall	Length	mm	1350	1480	1850	1950	2100		2150	2250
	Width	mm	1320	1450	1810	1900	2000		2100	2200
	Height	mm	1350	1460	1860	1930	2150		2200	2300

 

 

Contact information

Sky ZHOU

Email: sky8tears@gmail.com

Tel/whatsapp +8618523178237

Website:www.assenpe.com

Payment Terms︰ TT/LC

Product Image